Klantvragen: Installatie & wifi

1. 1antwoord

   WiFi setup: I enter my network and password but the Pylon-Monitor never connects

   Set it up at least 5 m from the router, make sure it can join a 2.4 GHz network (a separate 2.4 GHz or guest network helps; avoid "WPA3 only"), re-check the password character by character, and power it from a 5 V / 2 A wall charger. As a last resort, reinstall it over USB at pylon-monitor.com/reset.

   Beantwoord Installatie & wifi 🇦🇺 Australië ·25 september 2026
2. 1antwoord

   Three inverters with three separate stacks of 8 × US2000 — can I monitor each stack with its own Pylon-Monitor in Home Assistant?

   Yes. Use one Pylon-Monitor per stack, each plugged into its own master. Each gets its own IP address; give each a different device name in Settings (the default is pylon-monitor.local), and each appears as its own device in Home Assistant.

   Beantwoord Installatie & wifi 🇬🇧 Verenigd Koninkrijk ·7 september 2026

Gepubliceerd zonder namen of contactgegevens. Klanten worden alleen met initiaal en land vermeld.