Ik heb 5 × UP5000 (in plaats van US5000). Zijn die compatibel met uw apparaat? Ik wil het met Home Assistant gebruiken.
I have 5 × UP5000 (as opposed to US5000). Are these compatible with your device? I want to use it with Home Assistant.
Ja. De UP5000 heeft dezelfde laagspannings-Console-poort (RS-232) en hetzelfde consoleprotocol als de ondersteunde US5000 en UP2500. Eén Pylon-Monitor op de Console-poort van de master leest alle vijf de batterijen afzonderlijk uit, en Home Assistant werkt via MQTT-auto-discovery of een REST-sensor.
Ik heb 5 × UP5000 (in plaats van US5000). Zijn die compatibel met uw apparaat? Ik wil het met Home Assistant gebruiken.
I have 5 × UP5000 (as opposed to US5000). Are these compatible with your device? I want to use it with Home Assistant.
Ja, de UP5000 werkt. Voor compatibiliteit telt de laagspannings-Console-RJ45-poort (RS-232) en het standaard consoleprotocol van Pylontech — de UP5000 heeft beide, net als de UP2500 en US5000 die we officieel ondersteunen. We hebben de UP5000 niet bij naam getest, maar er is geen protocol- of connectorverschil dat het zou tegenhouden.
Voor uw 5 batterijen volstaat één Pylon-Monitor. Steek zijn kabel alleen in de Console-poort van de master; de master geeft de vragen door aan de hele groep. Alle 5 worden afzonderlijk gelezen en getoond (laadtoestand, spanning, stroom, vermogen, status, gezondheid, cycli, temperaturen), plus een naar capaciteit gewogen gecombineerde laadtoestand. Eén apparaat beheert tot 16 batterijen, dus u heeft ruim voldoende marge.
Home Assistant wordt native ondersteund: MQTT-auto-discovery (nul YAML, de sensoren verschijnen vanzelf) of een kort REST-sensorblok dat het apparaat voor u genereert. De installatie is een wifi-portaal van 2 minuten, zonder app of account.
Yes, the UP5000 works. What matters for compatibility is the low-voltage Console RJ45 (RS-232) port and the standard Pylontech console protocol — the UP5000 has both, just like the UP2500 and US5000 we officially support. We haven't tested a UP5000 by name, but there is no protocol or connector difference that would stop it.
For your 5 batteries you need only one Pylon-Monitor. Plug its cable into the Console port of the master unit only; the master relays the questions to the whole group. All 5 are read and shown individually (state of charge, voltage, current, power, state, state of health, cycles, temperatures), plus a capacity-weighted combined state of charge. One device handles up to 16 batteries, so you have plenty of headroom.
Home Assistant is native: either MQTT auto-discovery (zero YAML, sensors appear by themselves) or a short REST sensor block that the device generates for you. Setup is a 2-minute WiFi portal, with no app or account.
Gepubliceerd zonder namen of contactgegevens. Klanten worden alleen met initiaal en land vermeld.
Sluit u aan bij 6.000 Pylon-Monitor-fans op Facebook
Nieuws, firmware-updates, echte installaties en tips: volg de pagina en stel uw vragen aan de community.