Ho 5 × UP5000 (invece di US5000). Sono compatibili con il vostro dispositivo? Voglio usarlo con Home Assistant.
I have 5 × UP5000 (as opposed to US5000). Are these compatible with your device? I want to use it with Home Assistant.
Sì. La UP5000 ha la stessa porta Console a bassa tensione (RS-232) e lo stesso protocollo console delle US5000 e UP2500 supportate. Un Pylon-Monitor sulla porta Console del master legge tutte e cinque le batterie singolarmente, e Home Assistant funziona tramite l’auto-discovery MQTT o un sensore REST.
Ho 5 × UP5000 (invece di US5000). Sono compatibili con il vostro dispositivo? Voglio usarlo con Home Assistant.
I have 5 × UP5000 (as opposed to US5000). Are these compatible with your device? I want to use it with Home Assistant.
Sì, la UP5000 funziona. Per la compatibilità contano la porta RJ45 Console a bassa tensione (RS-232) e il protocollo console standard di Pylontech — la UP5000 ha entrambi, come la UP2500 e la US5000 che supportiamo ufficialmente. Non abbiamo testato la UP5000 per nome, ma non c’è alcuna differenza di protocollo o di connettore che possa impedirlo.
Per le vostre 5 batterie basta un solo Pylon-Monitor. Collegate il suo cavo solo alla porta Console dell’unità master; il master inoltra le richieste a tutto il gruppo. Tutte e 5 vengono lette e mostrate singolarmente (stato di carica, tensione, corrente, potenza, stato, stato di salute, cicli, temperature), più uno stato di carica combinato ponderato sulla capacità. Un dispositivo gestisce fino a 16 batterie, quindi avete ampio margine.
Home Assistant è nativo: auto-discovery MQTT (zero YAML, i sensori compaiono da soli) oppure un breve blocco di sensore REST che il dispositivo genera per voi. La configurazione è un portale WiFi di 2 minuti, senza app né account.
Yes, the UP5000 works. What matters for compatibility is the low-voltage Console RJ45 (RS-232) port and the standard Pylontech console protocol — the UP5000 has both, just like the UP2500 and US5000 we officially support. We haven't tested a UP5000 by name, but there is no protocol or connector difference that would stop it.
For your 5 batteries you need only one Pylon-Monitor. Plug its cable into the Console port of the master unit only; the master relays the questions to the whole group. All 5 are read and shown individually (state of charge, voltage, current, power, state, state of health, cycles, temperatures), plus a capacity-weighted combined state of charge. One device handles up to 16 batteries, so you have plenty of headroom.
Home Assistant is native: either MQTT auto-discovery (zero YAML, sensors appear by themselves) or a short REST sensor block that the device generates for you. Setup is a 2-minute WiFi portal, with no app or account.
Pubblicato senza nomi né recapiti. I clienti compaiono solo con iniziale e paese.
Unisciti ai 6000 fan di Pylon-Monitor su Facebook
Novità, aggiornamenti firmware, installazioni reali e consigli: seguite la pagina e fate le vostre domande alla community.