Un solo Pylon-Monitor può leggere un master US3000C con quattro US2000C in catena (5 batterie o più)?
Funktioniert der Pylon-Monitor mit einem US3000C-Master und 4× US2000C (5 Batterien oder mehr)?
Chiesta il ·Aggiornata ·2 risposte
In breve
Sì. Un solo Pylon-Monitor collegato alla porta Console del master legge ogni batteria della catena — fino a 16 — e mostra ciascuna singolarmente, senza errori. I modelli misti (US3000C + US2000C) non sono un problema e viene mostrata ogni cella di ogni batteria.
D
Cliente D.🇩🇪 GermaniaDomanda
Italiano · traduzione
Salve team di supporto, ho la seguente domanda:
- Cosa succede se collego il prodotto al mio stack di 1× US3000C e 4× US2000C? Il master è la US3000C.
- L’app fornirà i dati delle batterie 1–4 oppure comparirà un messaggio di errore?
- Come si possono monitorare più di 4 batterie, ad esempio 5 o 8?
🇬🇧 Inglese · Traduzione inglese a cura del nostro team
Hello Support Team, I have the following question:
- What happens if I connect the product to my stack of 1× US3000C and 4× US2000C? The master is the US3000C.
- Will the app then provide data for batteries 1–4, or will I get an error message?
- How can more than 4 batteries be monitored, e.g. 5 or 8 batteries?
Originale · Deutsch
Hallo Support-Team, ich habe die folgende Frage:
- Was passiert, wenn ich das Produkt an meinen Stapel mit 1× US3000C und 4× US2000C anschließe? Master ist die US3000C.
- Liefert die App dann Daten von den Batterien 1–4, oder kommt eine Fehlermeldung?
- Wie können mehr als 4 Batterien überwacht werden, z. B. 5 oder 8 Batterien?
PM
Team Pylon-MonitorRisposta ufficiale
Italiano · traduzione
Grazie per il messaggio — grazie alla vostra domanda abbiamo aggiornato la documentazione sul nostro sito.
Con un master US3000C e quattro US2000C dietro (5 unità) non compare alcun errore: tutte e cinque le batterie vengono mostrate, da Battery 1 a Battery 5, ciascuna con il proprio stato di carica, tensione, corrente, potenza, stato, stato di salute, cicli e temperature. Il firmware legge fino a 16 batterie in una singola catena, non 4 come diceva prima il nostro sito.
Collegate il Pylon-Monitor solo alla porta Console del master. Il master inoltra le richieste alle altre batterie tramite i cavi di collegamento, come mostra lo schema qui sotto. I modelli misti vanno bene: lo stato di carica combinato è ponderato sulla capacità di ciascuna batteria anziché semplicemente mediato.
🇬🇧 Inglese
Thank you for your message — thanks to your question, we updated the documentation on our website.
With a US3000C master and four US2000C behind it (5 units), no error appears: all five batteries show up, Battery 1 to Battery 5, each with its own state of charge, voltage, current, power, state, state of health, cycles and temperatures. The firmware reads up to 16 batteries in one chain, not 4 as our website used to say.
Plug the Pylon-Monitor into the Console port of the master only. The master relays the questions to the other batteries through the link cables, as shown in the diagram below. Mixed models are fine: the combined state of charge is weighted by each battery's own capacity rather than simply averaged.
Originale · Deutsch
Vielen Dank für Ihre Nachricht — dank Ihrer Frage haben wir die Dokumentation auf unserer Website aktualisiert.
Mit einem US3000C als Master und vier US2000C dahinter (5 Einheiten) erscheint keine Fehlermeldung: Alle fünf Batterien werden angezeigt, Battery 1 bis Battery 5, jede mit eigenem Ladezustand, eigener Spannung, eigenem Strom, eigener Leistung, eigenem Status, Gesundheitszustand, Zyklen und Temperaturen. Die Firmware liest bis zu 16 Batterien in einer Kette, nicht 4, wie es früher auf unserer Website stand.
Stecken Sie den Pylon-Monitor nur in den Console-Port des Masters. Der Master leitet die Abfragen über die Link-Kabel an die anderen Batterien weiter, wie im Schema unten gezeigt. Gemischte Modelle sind kein Problem: Der kombinierte Ladezustand wird nach der Kapazität jeder Batterie gewichtet, statt einfach gemittelt.
Sulla batteria master: CONSOLE verso il Pylon-Monitor, LINK PORT 1 verso la batteria slave.
L'errore che fanno quasi tutti: LINK PORT 1, non LINK PORT 0 Il cavo che collega la batteria master alla prima slave deve partire dal LINK PORT 1 della master — mai dal LINK PORT 0. Si inserisce nel LINK PORT 0 della slave, e ogni batteria successiva ripete lo stesso schema 1 → 0. Collegato al contrario, la master non vede mai il resto dello stack e il Pylon-Monitor mostrerà sempre una sola batteria, per quante ne abbiate.
La nostra prima risposta indicava che la vista per cella si fermava a 64 celle (circa quattro batterie). Quel limite è stato rimosso nel firmware del 4 settembre 2026: ora viene letta e mostrata ogni cella di tutte le 16 batterie.
🇬🇧 Inglese
Our first answer mentioned that the per-cell view stopped at 64 cells (about four batteries). That limit was removed in the firmware of 4 September 2026: every cell of all 16 batteries is now read and shown.
Originale · Deutsch
Unsere erste Antwort erwähnte, dass die Zellenansicht bei 64 Zellen (etwa vier Batterien) endete. Diese Grenze wurde mit der Firmware vom 4. September 2026 aufgehoben: Jede Zelle aller 16 Batterien wird jetzt gelesen und angezeigt.
Questa risposta vi è stata utile?
#US3000C#US2000C#multi-battery#master/slave#up to 16 batteries
Google Analytics 4 (tramite Tag Manager) ci aiuta a misurare il traffico di Pylon-Monitor.com, nel rispetto della vostra privacy. Nessun cookie pubblicitario. Informativa su privacy e cookie.