Diseñado y fabricado en Francia 6K fans en Facebook · Síganos
Entregada Ideas y hoja de ruta Todos los modelos

Idea: mostrar el tiempo de funcionamiento restante hasta el 10 % con la descarga actual

Preguntada el · Actualizada · 2 respuestas

Respuesta corta

Entregado en el panel en línea: mientras las baterías se descargan, muestra el tiempo estimado hasta el 10 % a la potencia actual (por debajo del 10 %, hasta vacío; en carga, hasta lleno). El nivel está fijado en el 10 %. La misma estimación en el propio dispositivo está prevista para un futuro firmware.

Cliente H. 🇷🇴 Rumanía Pregunta
Español · traducción

Hola, su monitor es muy bueno, pero tengo una idea: ¿no sería posible calcular directamente en el monitor la autonomía restante hasta el 10 por ciento, con la descarga real? Ejemplo: hay un 50 por ciento en las baterías, se descargan 500 W o lo que haya en ese momento — quedan x horas hasta el 10 por ciento.

🇬🇧 Inglés

Hello, your monitor is very good, but I have one idea: isn't it possible to calculate the remaining running time directly in the monitor, down to 10 percent, with the actual discharging? Example: you have 50 percent in the batteries, it is discharging 500 W or whatever is actual — you have x hours until 10 percent.

Equipo Pylon-MonitorRespuesta oficial
Español · traducción

¡Gracias por sus amables palabras y por esta muy buena idea! Una estimación del tiempo restante hasta un nivel elegido (por ejemplo el 10 %), basada en la descarga actual, sería sin duda muy útil. La hemos añadido a nuestra lista para una futura versión del firmware.

🇬🇧 Inglés

Thank you for your kind words and for this very good idea! An estimated remaining time until a chosen level (for example 10 %), based on the current discharge, would indeed be very useful. We have added it to our list for a future firmware version.

ActualizaciónEquipo Pylon-Monitor
Español · traducción

Hecho en el panel en línea. Mientras las baterías se descargan, ahora muestra el tiempo estimado hasta el 10 % a la potencia actual; por debajo del 10 % muestra el tiempo hasta vacío, y en carga el tiempo hasta lleno. La estimación solo aparece cuando la potencia supera unos 30 W, porque por debajo la cifra no significaría nada.

El nivel está fijado en el 10 % por ahora, no es seleccionable. La misma estimación directamente en el dispositivo está prevista para un futuro firmware.

🇬🇧 Inglés

Done in the online dashboard. While the batteries are discharging, it now shows the estimated time left until 10 % at the current power; below 10 % it shows the time until empty, and while charging the time until full. The estimate only appears when the power is above about 30 W, since below that the figure would not mean anything.

The level is fixed at 10 % for now, not selectable. The same estimate directly on the device is planned for a future firmware.

¿Le ha sido útil esta respuesta?
#idea#remaining time#runtime#autonomy#roadmap

Publicado sin nombres ni datos de contacto. Los clientes solo aparecen con su inicial y su país.

Únase a los 6000 fans de Pylon-Monitor en Facebook

Novedades, actualizaciones de firmware, instalaciones reales y consejos: siga la página y haga sus preguntas a la comunidad.

Seguir en Facebook