Designed & made in France 6K fans on Facebook · Follow us
Shipped Ideas & roadmap All models

Idea: show the remaining running time until 10 % at the current discharge

Asked · Updated · 2 answers

Short answer

Shipped in the online dashboard: while the batteries discharge it shows the estimated time left until 10 % at the current power (below 10 %, until empty; while charging, until full). The level is fixed at 10 %. The same estimate on the device itself is planned for a future firmware.

Customer H. 🇷🇴 Romania Question

Hello, your monitor is very good, but I have one idea: isn't it possible to calculate the remaining running time directly in the monitor, down to 10 percent, with the actual discharging? Example: you have 50 percent in the batteries, it is discharging 500 W or whatever is actual — you have x hours until 10 percent.

Pylon-Monitor teamOfficial answer

Thank you for your kind words and for this very good idea! An estimated remaining time until a chosen level (for example 10 %), based on the current discharge, would indeed be very useful. We have added it to our list for a future firmware version.

UpdatePylon-Monitor team

Done in the online dashboard. While the batteries are discharging, it now shows the estimated time left until 10 % at the current power; below 10 % it shows the time until empty, and while charging the time until full. The estimate only appears when the power is above about 30 W, since below that the figure would not mean anything.

The level is fixed at 10 % for now, not selectable. The same estimate directly on the device is planned for a future firmware.

Was this answer helpful?
#idea#remaining time#runtime#autonomy#roadmap

Published without names or contact details. Customers are shown by initial and country only.

Join 6,000 Pylon-Monitor fans on Facebook

News, firmware updates, real installations and tips: follow the page and ask your questions to the community.

Follow us on Facebook