Preguntas de clientes: Instalación y WiFi

1. 1respuesta

   WiFi setup: I enter my network and password but the Pylon-Monitor never connects

   Set it up at least 5 m from the router, make sure it can join a 2.4 GHz network (a separate 2.4 GHz or guest network helps; avoid "WPA3 only"), re-check the password character by character, and power it from a 5 V / 2 A wall charger. As a last resort, reinstall it over USB at pylon-monitor.com/reset.

   Respondida Instalación y WiFi 🇦🇺 Australia ·25 de septiembre de 2026
2. 1respuesta

   Three inverters with three separate stacks of 8 × US2000 — can I monitor each stack with its own Pylon-Monitor in Home Assistant?

   Yes. Use one Pylon-Monitor per stack, each plugged into its own master. Each gets its own IP address; give each a different device name in Settings (the default is pylon-monitor.local), and each appears as its own device in Home Assistant.

   Respondida Instalación y WiFi 🇬🇧 Reino Unido ·7 de septiembre de 2026

Publicado sin nombres ni datos de contacto. Los clientes solo aparecen con su inicial y su país.