Ontworpen & gemaakt in Frankrijk 6K fans op Facebook · Volg ons
Opgelost Toegang op afstand Alle modellen NL + EN

Ik kan mijn Pylon-Monitor thuis uitlezen — hoe zie ik hem als ik niet thuis ben, en is het hetzelfde dashboard?

Gevraagd op · Bijgewerkt · 2 antwoorden

Kort antwoord

Schakel op het apparaat Settings → Public JSON access in en kopieer de toegangssleutel, log daarna in op pylon-monitor.com/account met het e-mailadres van uw bestelling en koppel het apparaat met die sleutel. U ziet dan uw batterijen en hun geschiedenis overal, zonder poortdoorsturing of VPN.

Klant J. 🇳🇱 Nederland Vraag
Origineel · Nederlands

Goedemiddag. Ik heb een monitor bij jullie gekocht en ik kan hem lokaal uitlezen. Maar hoe kan ik het nu instellen om op afstand te kunnen kijken als ik niet thuis ben, en krijg je dan ook hetzelfde dashboard te zien?

🇬🇧 Engels · Engelse vertaling door ons team

Good afternoon. I bought a monitor from you and I can read it locally. But how do I set it up so I can look at it remotely when I'm not at home — and do you then see the same dashboard?

Pylon-Monitor-teamOfficieel antwoord
Origineel · Nederlands

Open op het apparaat Settings → "Public JSON access", zet het aan en kopieer de Access key.

Log daarna in op pylon-monitor.com/account met het e-mailadres waarmee u heeft besteld, plak de sleutel en klik op "Link this device" (herhaal dit voor elk apparaat als u er meerdere heeft).

U ziet uw accugegevens dan overal, zonder port forwarding of VPN: lading, vermogen, spanning, temperaturen, elke accu afzonderlijk en een geschiedenis tot drie jaar. Het is geen kopie van de lokale pagina maar een online dashboard gemaakt om op afstand te kijken, met de geschiedenis die het apparaat zelf niet kan bewaren.

🇬🇧 Engels

On the device, open Settings → "Public JSON access", switch it on and copy the Access key.

Then sign in at pylon-monitor.com/account with the e-mail address you ordered with, paste the key and click "Link this device" (repeat for each device if you have several).

You then see your battery data from anywhere, with no port forwarding or VPN: charge, power, voltage, temperatures, every battery individually, and a history of up to three years. It is not a copy of the local page but an online dashboard built for remote viewing, with the history the device itself cannot keep.

UpdatePylon-Monitor-team
Nederlands · vertaling

Exacte stappen met de huidige firmware: open op het apparaat Settings → „Public JSON access”, klik op „Generate random key”, vink „Enable a real public URL (via pylon-monitor.com)” aan en klik op Save. Wacht ongeveer twee minuten tot het apparaat zijn eerste gegevens verstuurt en voeg de sleutel dan toe op pylon-monitor.com/account („Link this device”).

De sleutel wordt ook vervangen wanneer u het apparaat volledig reset, en de Cloud-koppeling wordt uitgeschakeld: herhaal de bovenstaande stappen. Toont de Cloud daarna nog steeds „not found”, zie dan de draad over de Cloud die geen gegevens ontvangt (vast IP zonder werkende DNS-server).

🇬🇧 Engels

Exact steps on the current firmware: on the device, open Settings → “Public JSON access”, click “Generate random key”, tick “Enable a real public URL (via pylon-monitor.com)” and click Save. Wait about two minutes so the device sends its first data, then add the key at pylon-monitor.com/account (“Link this device”).

The key is also replaced when you do a full reset of the device, and the Cloud link is switched off: repeat the steps above. If the Cloud still shows “not found” after that, see the thread about the Cloud receiving no data (fixed IP without a working DNS server).

Was dit antwoord nuttig?
#remote access#online dashboard#public JSON#access key#no VPN

Gepubliceerd zonder namen of contactgegevens. Klanten worden alleen met initiaal en land vermeld.

Sluit u aan bij 6.000 Pylon-Monitor-fans op Facebook

Nieuws, firmware-updates, echte installaties en tips: volg de pagina en stel uw vragen aan de community.

Volg ons op Facebook