A dedicated mainboard
Designed for Pylon-Monitor and nothing else. Not a generic development board with add-on modules — every trace on it was drawn to read your battery.
Zero wires inside
Screen, RJ45 socket, USB-C, radio and protection are all soldered onto the same board. No wires, no ribbon, no internal connector that works loose with heat or vibration.
4-layer, industrial-grade PCB
Two internal planes dedicated to ground and power, as on professional equipment: a cleaner signal, less noise, a more reliable battery link.
Factory-assembled and inspected
Components placed by machine, automated soldering and optical inspection at the factory. Every board is identical to the last — no hand soldering.
WiFi that reaches further
The antenna sits at the board edge with a copper-free zone around it: much better reception, even at the far end of the house or behind a wall. No more drop-outs: its WiFi range is clearly greater than that of V2 and Lite.
Protected battery port
Surge-suppression diode and resettable fuse on the RJ45 socket: the board and your battery's CONSOLE port are protected against static discharge and bad contacts.
Texas Instruments power regulation
A 1 A brand-name regulator: rock-stable 24/7 operation, even on a cheap USB charger or an inverter's USB port.
Built-in USB service port
If it is ever needed, the firmware reinstalls over USB-C without opening the case or pressing a single button — the board resets itself.
Premium matte-black case, gold logo
A technical material chosen for its resistance to heat and knocks. Matte black finish, gold marking: at home in a plant room as much as in a living room.
Slimmer: 74 × 74 × 25 mm
11 mm thinner than V2. It sits on top of a battery, in a cabinet or flat against a wall.
Clip-shut, screwless design
Clipped lid and screwless board mounting: nothing to work loose over time. A vent grille lets the screen's heat out.
Colour screen, adjustable brightness
The same 1.8" colour screen as V2, plus 6 brightness levels to choose from and night mode.
Built for installers
Made to run non-stop at your customers' sites: multi-site fleet dashboard, free Cloud and 3 years of history included.
Every feature, no exceptions
Home Assistant, MQTT, JSON API, Jeedom, Smart Balance, up to 16 batteries, alarms and free lifetime updates: whatever V2 does, V3 does.
First run: 100 units
The first production run is limited to 100 units, shipped in pre-order sequence.
