-
2answers
The online dashboard stops receiving data overnight while the local page keeps working
The event log showed the WiFi staying connected while the secure connection to the Cloud could no longer be opened until a restart. Firmware v3.4.3 / Lite v1.1.3 fixes it: if nothing gets through for 20 minutes, the device quietly restarts by itself.
-
2answers
How can I set the Pylon-Monitor to HTTPS? Our Android tablets and phones refuse HTTP websites.
The device's own page works over HTTP only (password-protected, home network only); a certificate on a device inside a home network would still trigger a browser security warning. On Android, use the online dashboard at pylon-monitor.com/dashboard: it is HTTPS and shows the same data.
-
1answer
I prepare a device and send it to my customer. Can I then watch their batteries remotely, or will the WiFi be a problem?
Yes. The device only keeps the WiFi it was set up with; at the customer's it does not find it and opens its setup network by itself, the customer picks their own WiFi in about two minutes. The link to the online dashboard is kept, so the batteries appear remotely as soon as it is online, for example on /fleet.
-
1answer
How can I set the Pylon-Monitor to HTTPS?
The dashboard on the device works over HTTP only and cannot be switched to HTTPS; it is password-protected and only reachable from the home network. Data sent to the Cloud travels over HTTPS with the certificate checked, and the online dashboard is HTTPS.
-
1answer
Is there a guest or engineer access for my installer, other than sharing my username and password?
Yes: the fleet view. The installer creates a free account, opens pylon-monitor.com/fleet and adds the installation with its Access key (device Settings → Public JSON access). They see all the battery detail without the owner's password, and the owner keeps their own access.
-
1answer
Where is Smart Balance? I see nothing at the bottom of the dashboard except the report.
The Smart Balance card only appears once the Pylon-Monitor is linked to your account: tick Public JSON access in the device Settings, then paste its Access key on /dashboard. The card then sits at the bottom of the page, with the button to start a guided balance.
-
2answers
I entered my key on the website but the Cloud never receives data (“not found”)
After a full reset the device has a new key and the Cloud link is off: generate a key, tick “Enable a real public URL”, Save, wait two minutes, then link the key on /account. If it still sends nothing, check the event log for “Clock synchronised (NTP)”: the Cloud link is encrypted and needs the time. A fixed IP address with a missing or wrong DNS server is the usual cause. Clear it (DHCP) or enter a valid DNS, save and restart.
-
2answers
I can read my Pylon-Monitor at home — how do I see it when I'm away, and is it the same dashboard?
Turn on Settings → Public JSON access on the device and copy its access key, then sign in at pylon-monitor.com/account with your order e-mail and link the device with that key. You then see your batteries and their history from anywhere, with no port forwarding or VPN.
Published without names or contact details. Customers are shown by initial and country only.